Roofing Contractors in NYC

A sound roof protects everything under it. We repair leaks and replace flat and pitched roofs on homes across New York City, with careful flashing and drainage so water stays out.

  • 20+ Years Experience
  • 4.8★ Google Rating
  • Open 7 Days a Week
  • Free On-Site Estimates
Row of houses with new shingle roofs
Aerial view of a coated flat roof on a brick apartment building
Roofer inspecting the roof of a brick house, with a ladder at the eave
Roofer carrying a bundle of shingles across a roof

Our Roofing Services

Dark membrane flat roof with a parapet edge on a city building

Flat Roof Replacement

Modified bitumen, rubber (EPDM) and TPO roofs for row houses and flat-roofed homes.

Roofer fastening new asphalt shingles with a power nailer

Shingle Roofs

Asphalt shingle roofs installed over new underlayment, with proper vents and drip edges.

Roofer lifting damaged shingles to repair a leak

Roof Leak Repair

We trace each leak to its source and fix it, from an open seam to failed flashing.

Brick chimney on a shingle roof with a ladder for flashing work

Flashing, Chimneys & Parapets

Watertight flashing where the roof meets walls, chimneys and parapets.

Worker spraying a reflective coating on a flat roof

Roof Coatings

Reflective silver or white coatings that seal small cracks and keep the top floor cooler.

Gutter and white downspout along the edge of a roof

Gutters & Roof Drains

Gutters, leaders and drains cleared or replaced so rainwater runs off fast.

Our Roofing Process

  1. 01

    Roof Inspection

    We check the surface, seams, flashing and drains, and photograph any problem areas.

  2. 02

    Repair or Replace Estimate

    You get a free, clear estimate: a targeted repair or a new roof, and the right material.

  3. 03

    Tear-Off & Deck Repair

    Old layers come off where needed, and we repair the deck before anything new goes on.

  4. 04

    New Roof & Flashing

    We install the roof, flashing and drains, clean up, and walk you through the finished work.

Roofing FAQ

Yes. Most row houses and brownstones in New York City have flat or low-slope roofs. We repair and replace them with modified bitumen, rubber (EPDM) or TPO, and add a reflective coating where it helps.

If the damage is in one area and the rest of the roof is sound, a repair is usually enough. Repeated leaks, blisters or soft spots across the roof usually mean a replacement is better value. We inspect first and tell you honestly which one you need.

Most leaks start at edges and openings rather than the middle of the roof: flashing at parapet walls and chimneys, seams, skylights, vents and blocked drains. We trace the water to where it gets in before we fix it.

Most home roofs take a few days, depending on the size, how many old layers come off and the weather. We plan each day so your home stays protected overnight.

Yes. We clean, repair and replace gutters, leaders and roof drains so water leaves the roof quickly instead of pooling or running down your walls.